LG LCC-K1000 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 24

LG LCC-K1000 Скачать руководство пользователя страница 16

16

To set Alarm Input

You can set alarm input mode, alarm index, and
duration time. Preset numbers 1 to 8 are linked to
alarm inputs 1 to 8 respectively. If alarm input 1
comes in, the camera turns to preset position 1, and
to other positions according to alarm input 2 to 8.

1. Press the Set Up button then select the [PRESET]

icon.

2. Press SEL.

The sub menu will appear for [PRESET] setting.

3. Select [Set Alarm Input] option then press SEL.

The sub menu will appear.

4. Use 4 (ON) or 6 (OFF) buttons to select Alarm

Input Mode then press SEL.
ON: Alarm input signals are supplied from external
devices through the ALARM IN connector on the
camera to turn the camera to a preset position.
OFF: The camera ignores alarm inputs.

5. Enter a [Alarm Index] number (1-8).

Note:

The available alarm index differ depending

on cameras. So please refer to camera’s manual.

6. Enter a [Duration Time] (0-255) then press SEL.

Displays the picture at the preset position for the
selected duration. (0; the camera hold at the pre-
set position continuously.)
Alarm input setting is finished and the setting is
memorized to the camera’s memory.

7. Repeat steps 4-6 to set additional Alarm Input.

To set Alarm Output

You can set alarm output mode, alarm index, and
duration time. When alarm inputs are supplied via the
alarm input connector on the camera, the camera
sends output signals via the alarm output connector
on the camera.
Alarm output numbers 1 to 4 are linked to alarm
inputs 1 to 4 respectively. If alarm input 1 comes in,
the camera sends output signals via the alarm
output 1 connector on the camera

Note:

You cannot use this function with a camera

without alarm output connector.

1. Press the Set Up button then select the [PRESET]

icon.

2. Press SEL.

The sub menu will appear for [PRESET] setting.

3. Select [Set Alarm Output] option then press SEL.

The sub menu will appear.

4. Use 4 (ON) or 6 (OFF) buttons to select Alarm

Input Mode then press SEL.
ON: If alarm input comes in, the camera sends
output signals.
OFF: The camera does not send an output signal.

5. Enter a [Alarm Index] number (1-4).

6. Enter a [Duration Time] (1-255) then press SEL.

Sends the output signals for the selected duration.
(0; the camera sends output signals continuously.)
Alarm output setting is finished and the setting is
memorized to the camera’s memory.

PRESET

000

PTZ

PRESET

000

PTZ

[

vV

:

bB

]

Clear All Preset
Clear Group
Set Alarm Input

Alarm Input

: OFF

Alarm Index

: - - -

Duration Time : - - -
<4:OFF , 6:ON> [Num]

PTZ

000

PTZ

000

[

vV

:

bB

]

Set Alarm Ouput

Alarm Output

: ON

Alarm Index

: - - -

Duration Time : - - -
<4:OFF , 6:ON> [Num]

PTZ

000

PTZ

000

LCC-K1000_AABBLLG_ENG 8/9/05 2:55 PM Page 16

«
...
14
15
16
17
18
...
»

Содержание LCC-K1000

























Отзывы:

Нет отзывов