LG LBC24360ST, Руководство по обслуживанию

Страница: 7 / 69

3-5 DEFROST CONTROL ASSEMBLY
Defrost Control assembly consists of Defrost Sensor and
FUSE-M.
The Defrost Sensor works to defrost automatically. It is
attached to the metal side of the Evaporator and senses its
temperature. At 46F(8°C), it turns the Defrost Heater off.
Fuse-M is a safety device for preventing over-heating of
the Heater when defrosting.
1. Pull out the grille assembly. (Figure 1)
2. Separate the connector with the Defrost Control
assembly and replace the Defrost Control assembly after
cutting the Tie Wrap. (Figure 2)
Figure 1
Figure 2
DEFROST-CONTROL
ASSEMBLY
3-3 DOOR ALIGNMENT
3-4 FAN AND FAN MOTOR(EVAPORATOR)
If the space between your doors is uneven, follow the
instructions below to align the doors.
Remove the top hinge cover screws. Lift the hook located at
the bottom of the front side of the cover with a flat-head
screwdriver. Loosen the Top Hinge Bolts using a 10mm or
13/32-in. Socket wrench or open-end wrench. Have someone
hold the refrigerator door so that the space between the two
door is even, and tighten the top hinge bolts.
Replace the Top Hinge Cover.
1. Remove the freezer drawer, (If your refrigerator has an
icemaker, remove the icemaker first).
2. Remove the grille by pulling the grille forward.
3. Remove the Fan Motor assembly by loosening 3 screws
and disassembling the shroud.
4. Pull out the fan and separate the Fan Motor bracket.
7