LG LBC22520TT, Руководство по обслуживанию

Страница: 6 / 49

Fig. 11
Turn freezer door upside down on a non-scratch
surface and remove the 2 screws and Hinge Pin Insert.
of the bracket. Insert the 2 screws as shown below.
Lift up door slightly and remove it.
Remove the 2 screw on the opposite side of the door.
Hinge Pin
Fig. 10
Hinge Pin
Insert
Hinge Pin
Insert Bracket
Fig. 9
3-1-3. HOW TO REVERSE DOOR HANDLE
•
•
Use an adjustable wrench to remove the 2 handle
mounting screws.
Carefully loosen the plug buttons with your fingers.
The buttons can be unscrewed with your fingers,
rotating the pieces counter clockwise, and then
the piece will be loose and fall. The buttons were
installed little pressure, for this reason the
action can be done with your forefinger or thumb
finger or with both.
NOTE : To assist in installing the handle on the right
side, place a small piece of masking tape near the
top of the handle before removing.
Grasp the handle tightly with both hands and slide the
handle up (this may require some force).
The keyhole slots on the back of the handle allow
the handle to separate from the mounting screws.
Key hole
slots on
back
of handle
Screws
mounted
on door
Fig. 13
Screws
mounted
on door
Fig. 14
Using a 1/4 socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Bracket. Use a
10mm or 13/32 inch socket wrench to remove the 2
bolts in Middle Hinge Bracket. Remove screw. Set
Middle Hinge Bracket and other parts aside.
Fig. 21
Middle Hinge
Bracket
Middle Hinge
Bolts
Screw
Fig.12
Plug buttons
Install the plug buttons on the left side.
•
Fig. 15
- 6-