Appendix
23
Appendix
6
About Status LED’s Condition
Color
Status
(Off ) (White)
The unit is waiting for network connection
Network Status
(White) (Red)
The initial unit is being connected to the network
(
button is pressed)
(White)
The unit is connected to the network
(Off ) (Red)
The additional unit is being connected to the network
(
button is pressed)
(Dimmed White)
Network standby mode
Standby Mode Status
(Red)
Standby mode
,
Note for Status LED’s Condition
y
When you set the group at first, Network status LED turns green.
y
The additional groups are set, the Network status LED color is changed in group order.
(
(Green) >
(Magenta) >
(Cyan) >
(Blue) >
(Yellow) )
y
If the grouped speakers switch to the network standby mode, the brightness of Network status LED gets
dark.
Specification
Power requirements:
Refer to the main label on
the unit.
Power consumption:
50 W
y
Networked standby : 6.0 W
(If all network ports are activated.)
Amplifier Total output:
700 W
Bluetooth:
Codec SBC
Dimensions (W x H x D):
(1100 x 106 x 135) mm
(without Foot)
Net Weight (Approx.):
8.2 kg
y
Design and specifications are subject to change
without notice.
OPEN SOURCE
SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL
and other open source licenses, that is contained in
this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping and handling) upon email request
to [email protected]. This offer is valid for three
(3) years from the date on which you purchased the
product.
