manualshive.com logo in svg

LG L15, Руководство по установке, Страница: 29 / 35

Поделиться
Скачать
LG L15 Скачать руководство пользователя страница 29

ENGLISH

29

User Image

 •

This feature enables the playback of your desired photos and movies using your USB storage device.  

(If you select User Image, the contents options of Movie and Photo are enabled. 

- Movie: Plays movies stored in the ISM (or ism) folder on your USB storage device 

- Photo: Plays a slide show of images stored in the ISM (or ism) folder on your USB storage device.

 •

If both USB 1 and USB 2 are active, the User Image feature is performed on the device connected to USB 1.

 •

While User Image is performed, menus are not displayed until you press a key. 

If you press a key, menus are displayed and you can change settings.

 •

The User Image feature is performed on the USB 1 device if USB storage devices are connected to both USB 1 and 

USB 2.

 •

While User Image is performed, USB 1 and USB 2 must be unoccupied for the playback of contents stored on internal 

memory.

 •

When there is no valid folder/contents, no action is performed.

 •

You can store movies and photos on internal memory using Ez Download.

 How to Download an ISM Photo/Movie in Ez Download.

1 

  In order to download a user image in Ez Download, there must be a user image file in an ‘ism’ or ‘ISM’ folder on 

your USB drive.

2 

Delete the existing contents stored on internal memory before downloading a new image file.

3 

Add [ISMPHO] as a prefix to the name of a file for photos or [ISMMOV] if the file contains movies, to distinguish 

the file from others (EPK, Logo, No Signal, etc).

4 

Download ISM photos or movies in Ez Download.

 NOTE

 •

You can download one movie file of up to 30 MB.

 •

You can download multiple photos of up to 5 MB combined.

Содержание L15




































Отзывы:

Нет отзывов