LG KD-24D Скачать руководство пользователя

Страница: 1 / 56

●

DIGITAL KEY TELEPHONE / Quick Reference Guide

KD, KD/E, LKD Series

DIGITAL KEY TELEPHONE / Quick Reference Guide KD, KD/E, LKD Series

Fixed Feature Buttons

●

FLASH

button is used to terminate an outside call

and re-seize dial tone without having to hang up
the handset.

●

SPEED

button provides you with access to speed

dialing, save number redial and last number redial.

●

TRANS

(TRANSFER) button is used to transfer an

outside call from a station to another.

Quick Reference Guide for Digital Key Telephone

●

MUTE

button allows you to switch the built in

microphone on or off when using the speakerphone
or the handset microphone when using the handset.

●

MON/SPEAKER

button enables you to make a phone

call without lifting handset. It turns the telephone on
and off when using the speakerphone.

●

HOLD

button enables you to place an outside caller

Quick Ref. Gui

●

CALLBK

(CALLBACK) button allows you to leave

a callback indication at a station that is busy,
unattended, or in Do Not Disturb.

●

CONF

button is used to establish conference calls.

●

DND/FWD

(Do Not Disturb/FORWARD) button

allows you to forward your calls to another
destination, or make DND mode.

on hold.

●

REDIAL

allows you to make last number redial and

auto call number redial.

●

▼

VOLUME

▲

bar allows you to adjust speakerphone

and handset volume.

Call Forward

●

Press MON/SPEAKER button

Leaving a Message Waiting Indication

If you dial a station that is unattended or in Do

●

Press MON/SPEAKER button.

●

Press DND/FWD button and dial the desired Call

Forward type.
- 0 : Follow me (not available in GDK-16/20W)
- 1 : Unconditional
- 2 : Busy calls
- 3 : No answer calls
- 4 : Busy/no answer calls
- 5 : Station off-net
- 6 : Incoming outside line to off-net (Sys. ATD only)
- 7 : No Answer DVU forward-1(after 4sec)
- 8 : No Answer DVU forward-2(after predefined time)
- 9 : Busy DVU forward

If you dial a station that is unattended or in Do
Not Disturb, you can leave a message waiting
indication.

●

Dial the desired intercom station. Busy tone or

DND tone is heard.

●

Press CALLBK button. The called party’s CALLBK

button LED will flash.

To answer a Message Waiting Indication,

●

Press flashing CALLBK button and the station that

left message will be signaled with tone ringing.

●

If called station does not answer, press the CALLBK

button once to leave a message.

- # : Cancel previous call forward

●

Dial the station number or press DSS button or

intercom group where calls are forwarded.

(Confirmation tone is heard.)

Call Wait (Camp-on)

If you dial a busy station, you may alert it to your call.

●

After receiving intercom busy tone, dial

or the last

digit of called station number or press DSS button.

●

When the called party answers, consult with them

or hang up to transfer the call, if any.

Placing an Outside Call on Hold

While connected to an outside line,

●

Press HOLD/SAVE button.

- Once for system hold
- Twice for exclusive hold

●

Reverse if hold preference is programmed to

system hold.

●

Press HOLD/SAVE button. (in GDK-16/20W)

CO line call will be put on hold according to the
Hold Preference.

Conference

●

Call the desired party (internal or outside). When

called party answers, press CONF button.

●

Add next conference party by selecting another

outside line or intercom station.

●

When the party answers, press CONF button twice.

All parties are connected.

To terminate a conference,
The conference initiator should be actively in the
conference.

●

Hang up, or press CONF button to finish the

Last Number Redial

The last dialed number on an outside line is saved.

●

Press REDIAL button. Or,

●

Press SPEED button and dial *.

Save Number Redial

(

＊

)

If you wish to save a number you dialed,

●

After dialing the number of an outside party, keep

the handset off-hook.

●

Press SPEED button twice.

To dial a saved number,

●

Press SPEED button and dial #.

conference (only for conference initiator).

Note : The feature which is marked

(

＊

), is not available in GDK-16/20W.

Содержание KD-24D

























































Результаты поиска

Содержание KD-24D

Отзывы:

Похожие инструкции для KD-24D

Бренды по названию

Популярные бренды

LG KD-24D, Краткое руководство пользователя

Результаты поиска

Содержание KD-24D

Отзывы:

Похожие инструкции для KD-24D

Бренды по названию

Популярные бренды