33
Canceling a timer recording
You can cancel a timer record before the timer recording actually starts.
Select a timer recording that you want to cancel on the [Timer Record List]
menu and press CLEAR.
Timer Recording Troubleshooting
Even though the timer is set, the unit will not record when:
– There is no free space on the HDD.
– A non-recordable is not free space on the HDD.
– The unit is under operating (recording, deleting etc.).
– There are already 255 titles recorded on the HDD.
You cannot enter a timer program when:
– A recording is already underway.
– The time you’re trying to set has already passed.
– There are already 16 timer programs set.
If two or more timer programs overlap:
– The earlier program takes priority.
– When the earlier program finishes, the later program starts.
– If two programs are set to start at exactly the same time, the program
entered first takes priority.
Time Slip
You can watch the title that you are currently recording to HDD with this
function. After the recording is progressed over 15 seconds, press PLAY
(
B
) to playback the title that you are currently recoding. If you stop play-
back the title, returns to the current recording position.
If you want to stop recording without stopping the current playback, press
and hold STOP (
x
)
more than two seconds.
Recording From an external inputs
You can record from an external component, such as a camcorder or VCR,
connected to any of the unit external inputs.
Each press of the AV changes the input source as described below. Make
sure that the component you want to record from is connected properly to
the unit before recording an external source.
Tuner: Built-in tuner
AV1: AV1 scart jack mounted on back panel
AV2: AV2 DECODER scart jack mounted on back panel
AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel
Using time shift function
This feature allows you to pause or rewind live TV, so you do not miss a
thing if you were interrupted.
Press TIME SHIFT then press PAUSE (
X
) while watching live broadcast
before answering the phone. The timeshift function will record the broad-
cast of later viewing. Before using this function, make sure that the unit is
in HDD mode.
If no button is pressed for 6 hours, the timeshift will stop automatically. You
can use trick play functions (slow, scan, etc.) during timeshift. Refer to
playback operation on page 41-43.
Stop timeshift by pressing STOP (
x
) and confirm by pressing OK (
).
You will returned to watch a broadcast in real time.
Jump to start or end during timeshift
Press OK (
) to show progress bar during timeshift. Press
b
b
to jump to
the beginning and
B
B
to jump to the end of the timeshift.
Clip recording
If you want to record a timeshifted program as a title, press REC (
z
) at the
starting point and ending point you want to record. The timeshift progress
bar indicates a clip that you select with red bar. You can make more clips
by repeating this instruction. The clips will be recorded when you exit the
timeshift function.
Using time shift function automatically
If the [Time Shift] option in the Channel Setup menu is set to [ON],
timeshift starts automatically without pressing TIME SHIFT button in HDD
mode.
If you want to quit the timeshift function, set the [Time Shift] function to
[OFF].
HR407M-P_BGBRLLK_ENG 8/9/04 4:49 AM Page 33
