LG HBLG2504E, Руководство по обслуживанию

Страница: 9 / 39

Service Manual 9
Installation
Cabinet Installation
1. Open the window. Mark a line on the center of the window
stool between the side window stop moldings.
Loosely attach the sill bracket to the support bracket using
the carriage bolt and the lock nut.
2. Attach the sill bracket to the window sill using the screws
(Type B).
Carefully place the cabinet on the window stool and align the
center mark on the bottom front with the center line marked
window stool.
3. Using the M-screw and the lock nut, attach the support
bracket to the cabinet track hole. Use the first track hole
after the sill bracket on the outer edge of the window sill.
Tighten the carriage bolt and the lock nut. Be sure the cabi-
net slants outward.
CAUTION: Do not drill a hole in the
bottom pan. The unit is designed to
operate with approximately 1/2" of
water in bottom pan.
4. Pull the bottom window sash down behind the Top retainer
bar until they meet.
1. Do not pull the window sash down so tightly that the move-
ment of Frame curtain is restricted. Attach the cabinet to the
window stool by driving the screws (Type B) through the
cabinet into window stool.
2. The cabinet should be installed with a very slight tilt
downward toward the outside.
NOTICE
6
Screw(Type B)
Front Angle
Sash track
Front angle
Window stool
Upper
Guide
3
9
2
4
Support
Bracket
Lock nut
Sill
Bracket
Carriage
Bolt
2
6
3
(Type B)
Cabinet
Track hole
Support
Bracket
Carriage bolt
and lock nut
Machine screw(Type D)
and lock nut
Outer edge
of window
sill
Sill bracket
15
11
Window sash
Upper Guide
Cabinet
Foam
-Seal
Frame curtain
Foam-PE
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6