6
Installation
Hardware Installation
A. Connecting to Computer
1. Connect the USB converter cable to
the External Super Multi DVD
Rewriter.
2. Connect the other end of the USB
converter cable to your computer.
3. Connect the AC adapter plug to the
power connector at the rear of the
drive.
Attach the AC adapter to the AC wall
outlet.
4. When the computer is ready, confirm
that the drive is detected. And then,
insert the supplied software CD into
the External Super Multi DVD Rewriter
and install the software.
B. Connecting to Camcorder or
Video Device
1. Connect the Camcorder or Video
device.
Refer to the manual supplied with the
device to be connected.
• Make sure you have a personal computer with an open USB port before connecting
the drive to your computer.
• Power for all devices should be turned off before attaching the cables.
Connect the drive to the computer and to a camcorder, VCR or video device with
Audio/Video cables or S-video cable(not supplied.) as shown in figure.
OR
If your Video device is equiped with S-Video output, you can connect an RCA cable
from the audio output of the video device to the audio input of the drive, and S-Video
cable from the S-Video output of the video device to the S-Video input of the drive.
NOTE