REFRIGERATOR INSTALLATION
REMOVING AND REPLACING
REFRIGERATOR DOORS
To remove the left refrigerator door:
Pull the water tube out of the fitting while pressing
the release ring on the fitting. When you pull out
the tube, first you have to push the collet by
opposite direction of arrow in the upper picture
and tube pull out by direction of arrow.
w
w
CAUTION:
Before you begin, remove food and
bins from the doors.
1.
Open the door. Remove the top hinge cover
screw (1).
2.
Use a flat-head screwdriver to pry back the
hooks (not shown) on the front underside of
the cover (2). Lift up the cover.
3.
Remove the cover. Pull out the tube (3).
4.
Disconnect all the wire harnesses (4).
5.
Remove the grounding screw (5)
6.
Rotate hinge lever (6) counterclockwise. Lift
the top hinge (7) free of the hinge lever latch
(8).
IMPORTANT:
When lifting the hinge free of the
latch, be careful that the door does not fall
forward.
• Lift the door from the middle hinge pin and
remove the door.
w
w
CAUTION :
Always attach/detach with the
door open to 90°.
• Place the door, inside facing up, on a
nonscratching surface.
To remove the right refrigerator door:
1.
Open door. Loosen top hinge cover screw (1).
Lift up cover (2).
2.
Remove cover.
3.
Disconnect wire harness (3)
4.
Remove the grounding screw (4).
5.
Rotate hinge lever (5) clockwise.
Lift top hinge (6) free of hinge lever latch (7).
IMPORTANT:
When lifting the hinge free of the
latch, be careful that the door does not fall
forward.
• Lift the door from the middle hinge pin and
remove the door.
w
w
CAUTION :
Always attach/detach with the
door open to 90°.
• Place the door, inside facing up, on a
non-scratching surface.
15
Collet
(1)
(2)
(4)
(3)
(6)
(7)
(8)
(5)
(6)
(5)
(7)
(4)
(1)
(2)
(3)
ENGLISH
Содержание GRL2187EP
Страница 44: ......