ENGLISH
5
IMPORTANT SAFETY INSTRUCTIONS
Don’t use an extension cord
If possible, connect the refrigerator to its own individual
electrical outlet to prevent it and other appliances or
household lights from causing an overload that could
cause a power outage.
Accessibility of Supply Plug
The refrigerator-freezer should be so positioned that the
supply plug is accessible for quick disconnection when
accident happens.
Supply Cord Replacement
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
FEED WATER PIPE INSTALLATION
Before installation
• Automatic ice maker can be installed only by
manufacturer.
• Automatic ice maker operation needs water pressure
of 147~834 kPa (1.5~8.5 kgf/cm
2
) (That is, an instant
paper cup (180 cc) will be fully filled within 3 sec.).
• If water pressure does not reach the rating
147 kPa (1.5 kgf/cm
2
) or below, it is necessary to
purchase a separate pressure pump for normal
automatic icing and cool water feed.
• Keep the total length of the feed water pipe tube within
8 m and be careful for the tube not be bent. If the tube
is 8 m or longer it may cause trouble in water feed
owing to the drain water pressure.
• Install the feed water pipe tube at a place free from
heat.
w
w
WARNING
• Connect to potable water supply only.
• Refer to instructions with water filter kit for installation.
w
w
WARNING
• The refrigerant and insulation blowing gas used in the
appliance require special disposal procedures. When
disposal, please consult with service agent or a
similarly qualified person.
w
w
WARNING
• Please do not use a dishwasher to clean the lower
drawers; the high temperature may cause damage to
the baskets which make them unusable.
w
w
WARNING
The dedicated outlet should be used.
• Using several devices at one outlet may cause fire.
• The electric leakage
breaker may damage food
and the dispenser may be
leaked.
Do not allow the power plug to face upward
or to be squeezed at the back of the
refrigerator.
Water may be flown into or
the plug may be damaged,
which causes fire or
electric shock.
1. When connecting the power
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic
safety precautions should be followed, including the following.
Read all instructions before using this appliance.
Prevent the power cord from being squeezed
or imprinted if the refrigerator is pushed in
after the power plug is extracted during the
installation.
When moving your appliance away from the
wall, be careful not to roll over the power
cord or to damage it in any way.
It becomes the cause of fire or electric shock.
Do not allow the power cord bent or pressed
by the heavy object to
be damaged.
It may damage the power
cord to cause fire or
electric shock.
Содержание GRL2187EP
Страница 44: ......