20
EN
1
The Lock function prevents children or
others from accidentally changing
settings.
•
Before changing settings, press and hold
Lock for 3 seconds to unlock the display.
•
After changing settings, press and hold
Lock for 3 seconds to lock the display and
prevent accidental changes.
※
The Lock function locks all display
functions except for the Lock button. If a
button is pressed, the Lock icon will blink
3 times. The Lock function is automatically
turned on after 60 seconds if the control
panel remains idle.
※
The display turns on automatically when
the fridge is plugged in.
2
Press to select a temperature for storing
kimchi. The left compartment also has a
Storage setting for long-term storage of
kimchi.
Kimchi: M→H → L → Storage (left
compartment only)
•
Select the appropriate temperature for the
type and salinity of kimchi.
3
Press to set up either compartment for
refrigerating or freezing food.
Storage: Produce → Meat/Fish → Freezer
•
Select the appropriate temperature for the
type of food being stored.
4
Press to set up the left compartment for
fermenting kimchi or for Fast Chill.
Ferment: Fer. → Fast Chill
•
After fermentation is complete (about 6
days), Fer. Com. is displayed.
5
Press to set up the right compartment for
normal kimchi fermentation or for
fermentation.
Ferment: Fer. →
•
When set to , the bars light up as
the fermentation progresses.
6
The left and right compartments turn off
and on independently.
•
To turn off only one compartment, press
and hold the Lock button for 3 seconds,
until the Unlock (
) icon lights up. Then
press and hold the left or right Power
button for 3 seconds until the selected
compartment turns off and the Off icon
turns on.
•
To turn the power back on, press and hold
the Lock button for 3 seconds until the
Unlock (
) icon turns on. Then briefly
press the Power button.
CAUTION
Display Mode (For Store Use Only)
•
After 60 seconds of idle time, all lights on the
display except the Lock icon ( ) are turned
off to save power. This is normal operation.
Press any button to wake the display and show
current settings.
