2. Pull out the shroud assembly.
3. Loosen 2 screws holding fan motor bracket to remove
the fan and fan motor assembly.
3-5 DEF' CONTROL ASM
Def control ASM consists of Defrost Thermostat and FUSEÐM.
Defrost Thermostat functions to defrost automatically and it
is attached to the Evaporator and the metal side of the
case senses Temp.
Fuse-M is a kind of safety device for preventing over-
heating of the Heater when defrosting.
At the temperature of 77¡C, it stops the emission of TEMP
from the Defrost Heater.
1. After removing the Control Box, and Fan Grill loosen 2
screw and pull out the Shroud with it pulling with your
hand. (Figure 13)
2. Separate the 2 connectors connected with the Def
Control ASM and replace the Def Control ASM after
cutting the Tie Wrap and removing the Holder Fuse.
(Figure 14)
3-6 LAMP
3-6-1 Freezer
1. Remove all shelves in the freezer.
2. To remove the lamp cover, insert a 'Ñ' type driver in the
lower gap and pull out it as shown in (Figure 15).
3. Turn the lamp counterclockwise.
3-6-2 Refrigerator
1. Remove all shelves in the refrigerator.
2. Insert your hand in the lower aperture of the Lamp
Cover and remove it by pulling forward as shown in
(Figure 16).
3. Turn the lamp counterclockwise.
3-7 DAMPER CONTROL
1. Remove the control knob by pulling it out.
2. After removing the Lamp cover, loosen 2 screws fixing
the Damper control ASM to the body.
3. Remove the Damper control ASM and separate the
Damper and the Control box.
Figure 15
Figure 16
SHROUD-F
HOLDERS
FAN
DEF-THERMO
FUSE-M
HOLDER FUSE
Figure 13
Figure 14
SHROUD
FAN
FAN MOTOR
FAN MOTOR
BRACKET
Figure 12
DAMPER
CONTROL BOX
KNOB
LAMP COVER
Figure 17
- 7 -
