background image

56

ENSURING PROPER AIR CIRCULATION

In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, cool air enters through the bottom
of the freezer section and moves up. Most of the air then
flows through the freezer section vents and recirculates
under the freezer floor. The rest of the air enters the
refrigerator section through the top vent.

MULTI FLOW

The cooling fan operates more powerful and effective

If water or foreign substances enter the cool air vent
while cleaning, efficiency will be lowered. In addition, if
gasket is damaged, efficiency may be lowered because
of escaping cool air.

Do not block any of these vents

with food packages. If

the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.

IMPORTANT:

DOOR ALARM

Because air circulates between both

sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out of
food, wrap or cover foods tightly. (See the 

Food Storage

Guide

section for details.)

SETTING THE CONTROLS

Your refrigerator has two controls that let you regulate
the temperature in the freezer and refrigerator
compartments.

Initially set the REFRIGERATOR CONTROL at 37 °F
(3 °C) and the FREEZER CONTROL at 0 °F ( -18 °C).
Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature 
as desired.

Refrigerator control:32 °F to 47 °F (0 °C to 8 °C)

The lower the number setting, the colder the refrigerator
compartment will become.

Freezer control: -6 °F to 9 °F (- 21 °C to - 13 °C)

When the setting is at a lower number, the freezer
compartment becomes colder. 

NOTE:

To change °F/°C  press and HOLD COLDER key

c

o f freezer and COLDER key of refrigerator over 1 sec. at
the same time.

USING YOUR REFRIGERATOR

than in normal operation. This is specially noticeable
when new food is placed in the refrigerator compartment.

Ice Plus:

Press the Ice Plus key and the LED will turn
on. This function will remain activated for 24 hours and
intensify the cooling speed of freezer and increase the
amount of ice. 

With this feature you´ll listen a alarm when the freezer or 

refrigerator door is not closed within 1 minute after it is

opened. These tones repeat every 30 seconds.

The alarm is cancelled when the freezer or the refrigerator 

is closed correctly.

 Identify your control type

Содержание GM-739





































Отзывы: