background image

REFRIGERATOR INSTALLATION

REMOVING,REVERSING AND REPLACING REFRIGERATOR DOORS (For Swing Type Models)

T O O L S   Y O U   M A Y   N E E D

 Hex head socket wrench

No. 2 Phillips screwdriver

Flat head screwdriver

Allen wrench

10 mm
1/4 in
3/8 in

1/4 in
3/32 in

IMPORTANT:

Before you begin, turn the refrigerator OFF

and unplug it. Remove food and any adjustable door or
utility bins from doors.

HOW TO REVERSE DOOR OPENING DIRECT ION 

Other Important and necessary tools are:
       1/4 inch socket wrench           10mm open-end wrench
        Adjustable wrench                  Flat 2-inch putty knife



(Please identify the handle type of your refrigerator)

(When converting from the left-opening type to right-
opening type)

REFRIGERATOR DOORS SECTION

1. Removing Refrigerator Door

Lift the Refrigerator door (3) slightly and remove it.

Pry off the cover (4) using a slotted screwdriver to find the 
hole screw and attach it on the right.

Loosen the screws (5), remove the stopper (6) and
attach them on the left (on the opposite side).

Gently pry off the Top Hinge Cover with a flat head screwdriver

Using 10 mm socket wrench, remove the 3 bolts and lift off the

and remove (1).

Top Hinge. Set parts aside (2).

Using a ¼-inch socket wrench, loosen and remove 

   Hinge Pin (7) from the Middle Hinge Pin Bracket. 

   door slightly and remove it.

NOTE: 

At this point the door will be loose, lift up

Loosen the 2 screws (11) and the 2 screws (12), and
lift off the middle hinge (13).

Pry off the cover (9) using a slotted screwdriver and
attach it on the right.

2. Removing Freezer Door

Lift the door (10) slightly and remove it.
Loosen the 2 screws (11), the 2 screws (12), and lift
off the middle hinge (13).

Take off the base grille (14).

Loosen the 2 screws (16), remove the bottom hinge
(17), and attach on the left.

Loosen the 2 screws (18) and attach the stopper (19)
on the left side of the base.

   Before, remove totally the refrigerator door.

NOTE:

 To remove refrigerator handle, please refer to 

refrigerator handles section.

NOTE:

 To remove freezer handle, please refer to 

refrigerator handles section.

9

7

14

NOTE

: Handle and refrigerator appearance

may vary from illustrations on 

this page

51

Содержание GM-739





































Отзывы: