manualshive.com logo in svg

LG GHX-308A/616, Инструкция по установке и программированию

Поделиться
Скачать
LG GHX-308A/616 Скачать руководство пользователя страница 7

GHX-308A/616 
HYBRID KEY TELEPHONE SYSTEM 

Http://suryawardana.com 

7

SECTION 1.   INTRODUCTION  

1.1   PURPOSE 

   

This manual provides the information necessary to configure, install, operate and maintain the GHX-308A Hybrid Key 

Telephone System.    

1.2   REGULATORY INFORMATION 

 

A. TELCO NOTIFICATION  

Before  connecting  the  GHX-308A  Hybrid  Key  Telephone  System  to  the  telephone  network,  the  local  serving 
telephone  company  must  be  given  advance  notice  of  intention  to  use  customer  provided  equipment(CPE)  and 
provided with the information of the telephone numbers to be connected to the system.   

B. INCIDENCE OF HARM  

If  the  telephone  company  determines  that  the  customer  provided  equipment(CPE)  is  faulty  and  possibly  causing 
harm  or  interruption  to  the  telephone  network,  it  should  be  disconnected  until  repair  can  be  effected.  If  this  is  not 
done, the telephone company may temporarily disconnected service.  

C. CHANGES IN SERVICE  

The  local  serving  telephone  company  may  make  change  in  communications  facilities  or    procedures.  If  these 
changes should affect the use of GHX-308A or compatibility with the network, the serving telephone company must 
give written notice to the user to allow    uninterrupted service.  

D. MAINTENANCE LIMITATION  

Maintenance  on  the  GHX-308A  Hybrid  Key  Telephone  System  is  performed  only  by  the  manufacturer  or  its 
authorized agent. The user may not make any changes and/or repairs except as specifically noted in the manual. If 
unauthorized alterations or repairs are performed, any remaining warranty may be voided.  

E. NOTICE OF COMPLIANCE  

The  GHX-308A  Hybrid  Key  Telephone  is  designed  to  comply  with  rules  regarding  radiation  and  radio  frequency 
emission by class A computing devices. In accordance with FCC Standard 15(Subpart J), the following information 
must be supplied to the end user:  

“ WARNING:  

This  equipment  generates  and  uses  R.  F.  energy,  and  if  not  installed  and  used  in  accordance  with  the  instruction 
manual, it may cause interference to radio communications.  

It has been tested and found to comply with the limits for a Class A computing device, pursuant to Subpart J or Part 
15 or the FCC Rules, which are designed to provide reasonable protection against such interference, when operated 
in a commercial environment.  

Operation of this equipment in residential area could cause interference, in which case the user, at his own expense, 
will be required to take whatever measures may be required to correct the interference.”  

F. HEARING AID COMPATIBILITY  

The  GHX-308A  Hybrid  Key  Telephone  is  Hearing  Aid  Compatible,  as  defined  in  Section  68.316  of  Part  68  FCC 
Rules. 

Содержание GHX-308A/616














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды