GHX-308A/616
HYBRID KEY TELEPHONE SYSTEM
Http://suryawardana.com
100
VAU CHANNEL CONTROL (FLASH 59) (GHX-616)
Four message segments of VAU can be controlled for MOH or DISA individually.
Range:
Program button 1-3(Channel 1-3)
Default:
Channel 1-3 are all set for DISA
Procedure:
1.
Press FLASH button and dial 59.
2.
On a display phone, you will see this display:
SELECT VAU CHANNEL
1-3BTN OR 01-03 DIAL
3.
Determine channel to change control, press the program button 1-3 to select channel.
4.
If you press button 1 to select channel 1, you will see the setting of channel 1.
01 CHANNEL : 2(DISA)
1:MOH 2:DISA 3:UCD
Enter 1 digit(1 or 2) to change control of channel usage.
1 : channel use for MOH
2 : channel use for DISA
3 : channel use for UCD
5.
Press HOLD button.
INITIALIZATION (FLASH 60-65)
The system has been pre-programmed with certain features which are called default data, these features are loaded
into memory when the system is initialized. The system should ALWAYS be initialized when installed or at any time
the database has been corrupted.
To initialize the system to default values, repeat the procedures explained below for each of the database area.
1. Enter the programming mode.
2. Press FLASH button.
3. Dial the 2 digits initialization code.
INITIALIZE SYS PARAM
PRESS HOLD
4. Press HOLD button.
Initialization Code
60:
System parameters
61:
CO lines
62:
Station parameters
63:
Exception tables
64:
System speed numbers
65:
All data
DISA NO ANSWER TIMER (FLASH 66) ( GHX-616 )
If the station called by DISA/DID line does not answer within this timer, system regards the station does not answer the
call.
