manualshive.com logo in svg

LG GB175, Руководство по обслуживанию, Страница: 17 / 158

Поделиться
Скачать
LG GB175 Скачать руководство пользователя страница 17

-17- 

3.1.1 System overview 

 

The MT6225 is a highly integrated single chip solution for GSM/GPRS phone. Based on 32-bit 

ARM7EJ-STM RISC processor, MT6225 features not only high performance GPRS Class 12 
MODEM but is also designed with support for the wireless multi-media applications, such as 
advanced display engine, synthesis audio with 64-tone polyphony, digital audio playback, Java 
acceleration, MMS and etc. Additionally, MT6225 provides varieties of advanced interfaces for 
functionality extensions, like 3-port external memory interface, 3-port 8/16-bit parallel interface, 
NAND Flash, IrDA, USB and MMC/SD/MS/MS Pro.   

Platform 

MT6225 is capable of running the ARM7EJ-STM RISC processor at up to 104 MHz, thus 

providing fast data processing capabilities. In addition to the high clock frequency, a separate 
CODE cache is also added to further improve the overall system efficiency. For large amounts of 
data transfer, high performance DMA (Direct Memory Access) with hardware flow control is 
implemented, which greatly enhances the data movement speed while reducing MCU processing 
load. 

External Memory Interface

 

To provide the greatest capacity for expansion and maximum bandwidth for data intensive 

applications such as multimedia features, MT6225 supports up to 3 external state-of-the-art 
devices through its 16-bit host interface. High performance devices such as Mobile RAM and 
Cellular RAM are supported for maximum bandwidth. Traditional devices such as burst/page 
mode flash, page mode SRAM, and Pseudo SRAM are also supported. For greatest compatibility, 
the memory interface can also be used to connect to legacy devices such as Color/Parallel LCD, 
and multi-media companion chips are all supported through this interface. To minimize power 
consumption and ensure low noise, this interface is designed for flexible 
I/O voltage and allows lowering of the supply voltage down to 1.8V. The driving strength is 
configurable for signal integrity adjustment. The data bus also employs retention technology to 
prevent the bus from floating during a turn over.   

Multi-media Subsystem   

In order to provide more flexibility and bandwidth for multi-media products, an additional 8/16 

bit parallel interface is incorporated. This interface is designed specially for support with Camera 
companion chip as well as LCD panel. In addition, MT6225 has camera YUV interface that can 
connect to CMOS sensor of resolution up to VGA. Moreover, it can connect NAND flash device to 
provide a solution for multi-media data storage. For running multi-media application faster, 
MT6225 integrates also several hardware-based engines. With hardware based Resizer and 
advanced display engine, it can display and combine arbitrary size of images with up to 4 
blending layers. 

User Interface 

For user interactions, the MT6225 brings together all necessary peripheral blocks for 

multi-media GSM/GPRS phone. It comprises the Keypad Scanner with capability of 
multiple key pressing, SIM Controller, Alerter, Real Time Clock, PWM, Serial LCD Controller and 
General Purpose Programmable I/Os. For connectivity and data storage, the 
MT6225 consists of UART, IrDA, USB 1.1 Slave, SDIO and MMC/SD/MS/MS Pro. 

Audio Interface 

Using a highly integrated mixed-signal Audio Front-End,the MT6225 architecture allows for 

easy audio interfacing with direct connection to the audio transducers. The audio interface 
integrates D/A and A/D Converters for Voice band, as well as high resolution Stereo D/A 
Converters for Audio band. In addition, MT6225 also provides Stereo 
Input and Analog Mux. 

MT6225 supports AMR codec to adaptively optimize speech and audio quality. Moreover, 

HE-AAC codec is implemented to deliver CD-quality audio at low bit rates. 

Содержание GB175































































































































































Отзывы:

Нет отзывов