LG G3L-PUEA Скачать руководство пользователя страница 32

Страница: 32 / 98

CHAPTER 6 COMMUNICATION FUNCTION

6-17

After downloading the parameter, if you set ‘LINK Enable’ of GMWIN online menu, the

‘LINK Enable’ command is delivered to PLC and becomes the high speed link operation

state.

‘LINK Enable’ setting is available when PLC is in STOP mode. If the high speed link starts

after setting ‘LINK Enable’, it carries out the high speed link regardless of PLC action

mode and the ‘parameter’ and ‘Link Enable’ information shall be battery backup in PLC

CPU and the data shall be preserved even in case of power off.

Table 6.3 describes the action relation of PLC mode and high speed link.

Classification

Parameter

download

Link enable

setting

High speed link

action

Remarks

PLC Run

PLC Stop

PLC Pause

PLC Debug

Run when

high speed

link is

enabled.

Table 6.3 The relation of PLC mode and high speed link

6.1.6 High speed link information in GMWIN

1) High speed link information function

As high speed link service carries out the data exchange between more than 2

communication stations, it provides the user how to verify the high speed link service status

to verify the reliability of the data got from opposite station, as high speed link information.

That is, the communication module provides the user the high speed link information every

regular time whether the high speed link is run by the user setting parameter, by collecting

the data received till that time and the high speed link information includes the whole

information of RUN-LINK (_PHSxRLINK) and LINK-TROUBLE (_PHSxLTRBL) that enables

to know the whole information of communication network, and the individual information of

_PHSxSTATE that enables to know the communication state per slave station. The user can

use the above information in the keyword format when preparing the program, and monitor

the high speed link status by using the high speed link information monitor function. When

operating several PLC by using the high speed line, it is required to verify the reliability of

the sending/receiving data by using the high speed link information such as RUN-LINK or

LINK-TROUBLE etc. before using.

A) RUN-LINK (_PHSxRLINK)

This is the whole information that describes whether the high speed link is running

normally by the user setting parameter, and a contact point that once it is ‘ON’, ‘ON’ is

maintained till the ‘LINK Enable’. If the following conditions are given, ‘ON’ shall be

maintained :

Содержание G3L-PUEA



































































































Результаты поиска

Содержание G3L-PUEA

Отзывы:

LG G3L-PUEA, Руководство пользователя, Страница: 32 / 98

Результаты поиска

Содержание G3L-PUEA

Отзывы: