17
Listening to the DAB - more you can do
DAB mode
You can change the display information of the currently broadcasting DAB channel.
Press
DAB MODE
on the remote control repeatedly, the display changes in the following
order, SERVICE
t
PTY NAME
t
FREQUENCY
t
DLS
t
QUALITY
t
ENSEMBLE.
Select a display mode and then press
./>
, the initials of the service name are
displayed.
SERVICE
Displays the Name of Component for the current broadcast.
PTY NAME
Displays the Type of Component for the current broadcast.
FREQUENCY
Displays the frequency of Component for the current broadcast.
DLS
It displays the current Scroll of Component which is selected.
QUALITY
It displays the current strength of electric field of broadcasting which it
doing.
ENSEMBLE
Displays the Ensemble of Component for the current broadcast.
Aligning the service names
Press
SCAN/SORT
on the remote control to display the sorting mode of DAB broadcasting.
Then, press the button once again to change the mode.
Default sort
The service names are aligned in a scanning order.
Name sort
The service names are aligned in an alphabetical order.
DAB scan
Press
SCAN
on the remote control for longer than 3 seconds, all of the DAB bands are
scanned. Then press it again, scanning will be canceled.
Selecting among Primary and Secondary broadcasting.
For the frequency on which secondary broadcasting channels exist,
B
blinks after selection.
Then, press
B/[]
to select the secondary broadcasting.
NOTES
:
• Broadcasting may be interrupted or stopped while using it in a forest, some places enclosed
by buildings, or the places where reception sensitivity is weak.
• When you use the DAB function for the first time, the broadcasting channels are scanned
automatically.
Researching the channel
The previously saved channels are deleted, and then channels are searched again.
1
Press and hold
CLEAR
for 3 seconds.
- “DAB INITIAL” is displayed.
2
Press
CLEAR
once more.
- The previously saved channels are deleted, and then channels are searched again.
3
Enjoy the broadcasting.
NOTES
:
• “!!” : It is displayed when signal reception gets weak. When the unit receives no broadcasting
signals for the searched channel, then it searches available broadcasting channels.
• “2nd”: It is displayed when secondary broadcasting is selected.
Listening to the DAB
DAB (Digital Audio Broadcasting) is a new form of radio broadcasting using digital signals
rather than traditional analogue signals. DAB provides listeners CD-like quality radio
programs. DAB can carry not only audio but also text.
ON REMOTE
1 Select the DAB function
The frequency received fi rst after scanning DAB bands is
broadcasted.
FUNCTION
2 Select the DAB radio station
.>
3 Play the selected channel
B
PLAY
FB44-M0F_ENG.indd 17
FB44-M0F_ENG.indd 17
2010-06-04 3:08:35
2010-06-04 3:08:35
