Appendix
22
Appendix
6
Enjoying in a car with
the Headrest Mounting
Bracket
You can enjoy video in the back seat attaching the
unit to the back of the front seat.
y
The driver must not operate this unit while
the vehicle is moving.
y
Do not operate this unit where it can be
viewed by the driver.
y
Driver operation or viewing of this unit while
the vehicle is moving will cause distraction
which may result in serious accident and
personal injury or property damage.
y
Do not attach or detach while driving, and
do not attach in the following locations,
otherwise it may result in injury or traffic
accidents:
-
anywhere other than the back of the seat
-
in a location that interferes with the
driver’s view or operation of the car
-
in a location that interferes with the
operation of an airbag
-
in a location that interferes with the
driving instruments.
y
Depending on the type of headrest, you
may not be able to attach the bracket.
22
cm
or
less
>
Warning
1. Separate the headrest.
(Refer to your car’s user guide.)
2. Install the cradle as shown in the figure.
If you may not be able to install the headrest
cradle because of the pipe thickness of your
headrest, extend the cradle loosing its screws
and reinstall it.
,
Note
3. Put the headrest mounting bracket on the back
of unit and fix it using the fixing screws.
4. Fit the headrest mounting bracket joined the
unit to the cradle.
5. Adjust the horizontal and vertical angles as you
want and enjoy the movies.
When you adjust angles, loose the adjusting
screws. Adjusting by force can lead the
damage to the inside of your headrest
mounting bracket.
,
Note
Step 1
Step 2
Step 3
DT924-P.AARELLK_1518-ENG.indd 22
2012-04-24 5:02:57
