20
Enjoying in a car with
the Headrest Mounting
Bracket
You can enjoy video in the back seat
attaching the unit to the back of the front
seat.
Warnings
• The driver must not operate this unit
while the vehicle is moving.
Do not operate this unit where it can be
viewed by the driver.
Driver operation or viewing of this unit
while the vehicle is moving will cause
distraction which may result in serious
accident and personal injury or property
damage.
• Do not attach or detach while driving,
and do not attach in the following loca-
tions, otherwise it may result in injury or
traffic accidents:
– anywhere other than the back of the
seat
– in a location that interferes with the
driver’s view or operation of the car
– in a location that interferes with the
operation of an airbag
– in a location that interferes with the
driving instruments
• Depending on the type of headrest, you
may not be able to attach the bracket.
22 cm
or
less
Separate the headrest.
(Refer to your car’s user
guide.)
Install the cradle as shown in
the figure.
Note:
If you may not be able
to install the headrest cradle
because of the pipe thickness
of your headrest, extend the
cradle loosing its screws and
reinstall it.
Fit the headrest mounting bracket joined the unit to the
cradle.
Adjust the hori-
zontal and vertical
angles as you
want and enjoy the
movies.
Note:
When you adjust angles, loose the adjusting
screws. Adjusting by force can lead the damage to the
inside of your headrest mounting bracket.
Fixing screws
Vertical
adjusting screw
Horizontal
adjusting screw
Release
knobs
Put the headrest
mounting bracket on
the back of unit and
fix it using the fixing
screws.
Note:
Before fixing
bracket, attach the bat-
tery pack.
a
b d
c
