Connecting
18
C
onnecting
2
OPTICAL In connection
Connect an optical output of Unit (or Digital Device
etc) to the OPTICAL IN connector.
To the digital
optical output jack of your
component
Speaker ez setup
Listen to sound from TV, DVD and Digital Device
with 2 ch mode. Even in power off mode, if you
press
OPTICAL
, then power is on and automatically
changed to AUX OPT mode.
1. Connect the unit’s OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).
2. Select the AUX OPT by using the
OPTICAL
.
To select the AUX OPT directly.
3. Listen sound with 2 ch speaker.
4. To escape from AUX OPT by using the
OPTICAL
.
Function is retuned to previous one.
Antenna Connection
Connect the supplied FM/ AM antenna for listening
to the radio.
Connect the AM loop antenna to the AM antenna
connector. (A)
Connect the FM wire antenna to the FM antenna
connector. (F)
To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it horizontal.
,
Note
DM2730-AD-DPANLLK ENG 0418.indd 18
DM2730-AD-DPANLLK ENG 0418.indd 18
2013-03-08 1:37:56
2013-03-08 1:37:56
