Connecting
17
C
onnecting
2
Optional Equipment
Connection
AUDIO (PORT. IN) In
Connection
Connect an output of portable device (MP3 or PMP
etc) to the AUDIO (PORT. IN) input connector.
MP3 player, etc...
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external devices.
1. Connect the portable player to the
PORT.IN(PORTABLE IN) connector of the unit.
2. Turn the power on by pressing
1
(
POWER
).
3. Select the PORTABLE function by pressing
P
RADIO&INPUT.
4. Turn on the portable player or external device
and start it playing.
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1. Choose a different function mode or press
Z
STOP
twice in a row.
2. Remove the USB device from the unit.
You can only recharge your iPod through USB
port. To listen to music on iPod, refer to the
page 32.
,
Note
Compatible USB Devices
MP3 Player : Flash type MP3 player.
USB Flash Drive :
Devices that support USB2.0
or USB1.1.
The USB function of this unit does not support
some USB devices.
USB device requirement
Devices which require additional program
installation connected to a computer, are not
supported.
Do not extract the USB device while in operation.
For a large capacity USB, it may take longer than
a few minute to be searched.
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the
USB device is not recognized.
Using NTFS fi le system is not supported. (Only
FAT(16/32) fi le system is supported.)
This unit is not supported when the total
number of fi les is 1 000 or more.
External HDD, Card readers, Locked devices,
or hard type usb devices are not supported.
USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
DM2730-AD-DPANLLK ENG 0418.indd 17
DM2730-AD-DPANLLK ENG 0418.indd 17
2013-03-08 1:37:56
2013-03-08 1:37:56
