LG CordZero T9, Руководство пользователя

Страница: 14 / 48

14
Using Smart functions
Avoiding obstacles
The cleaner minimizes collision with nearby obstacles as
much as possible using four laser sensors attached at
both front side of the cleaner main unit.
•
The obstacle avoiding function is available for some
models only.
•
Performance may be degraded if dust gathers on the
laser sensor window. Wipe dust with a cotton swab.
•
Be careful that the cleaner can collide with the thin
desk leg, door, or obstacle lower than 30cm.
•
The obstacle may not be detected because there can
be a blind spot in the sensing area.
•
The backing-up function is available to escape when
collided with an obstacle in a blind spot.
•
This product is a Class I laser device of which conform-
ity assessment is conducted in accordance with the
IEC 60825-1.
Sensing
area
Sensing
area
Blind spot
Laser sensor
window
Cotton swab
RoboSense (automatic moving function)
The cleaner automatically follows the user if the cleaner
is away more than 1 meter while cleaning, using the gyro
sensor and radio frequency (RF) sensor integrated in the
cleaner main unit.
•
RoboSense is available for some models only.
Transmitter
sensor
About 1 m
Note
•
If you press the "-" button for 3 seconds, you can turn
RoboSense on or off.
•
If RoboSense is on, the blue RoboSense LED on the
top of the main body will be turned on.
•
If RoboSense is off, the blue RoboSense LED on the
top of the main body will be turned off.
CAUTIoN
•
Be careful that the cleaner can collide with a thin
desk leg.
CAUTIoN
•
Be careful that the cleaner can collide with a door.
1 MFL69727402_en_180316.indd 14 2018-03-15 오전 10:35:55