LG CordZero T9, Руководство пользователя

Страница: 12 / 48

12
Using the Hose Handle
1 Install the AAA battery provided with the product
in the hose handle before using the product.
•
Check the correct direction (+, -) of the battery.
2
If the battery needs to be replaced while in use, the
main unit power will be turned off and RoboSense
lamp will flash on top of the main unit. At this time,
replace the battery of the hose handle.
Main unit is off
3 You can control suction power strength by stage
or turn RoboSense on or off, using the hose handle
button.
2
1
1
Power on/off button
•
If the product is turned on, the produce will run
in standard mode and RoboSense on.
2
Strength adjustment button
•
If you press the “+” button, the mode will change
from Standard → Strong.
•
If you press the “+” more than 3 seconds, turbo
mode will be engaged. However, you cannot dir-
ectly switch from standard mode to turbo mode.
You can use maximum suction power when
RoboSense is turned off.
•
If you press the “-” button, all modes will change
to standard mode.
•
If you press the “-” button more than 3 seconds,
you can turn RoboSense on or off. However,
the mode will change to standard mode when
turning RoboSense on or off.
NoTE
•
The battery level LED on the upper side of the product
will flash for the user to check the battery level when -
ever the power is turned on.
• Do not keep the battery at a place with heaters or
heat.
•
Do not kick or apply strong shock to the hose.
Product use time by strength (based on the
fully-charged battery)
•
Normal mode: About 40 minutes
•
Power mode: About 30 minutes
•
Turbo mode: About 10 minutes
1 MFL69727402_en_180316.indd 12 2018-03-15 오전 10:35:53