LG CordZero R9, Руководство пользователя

Страница: 12 / 40

12
EN
Getting Started
Inserting Batteries into the
Remote Control
1
Release the tab at the back of the remote
control to open the battery cover.
2
Insert two AAA-type batteries into the
remote control.
•
Make sure the + and - ends of the
batteries are aligned properly.
3
Insert the bottom of the battery cover into
the remote control and close the cover.
Turning on the Power Supply
•
Press the Main Power Switch ON at the
back of the Robot Cleaner to turn on the
power supply.
•
To power off the Robot Cleaner, press the
Main Power Switch OFF .
NOTE
• If the Robot Cleaner does not turn on or
nothing is displayed on the Control Panel,
charge the Robot Cleaner manually.
•
If the main power supply is turned on during
charging, turn on the standby power supply to
use the Robot Cleaner.
Turning off the Standby Power
Supply
Press and hold the Start/Stop button for 3
seconds or press the Power button on the
remote control.
• To activate the Robot Cleaner standby, press
and hold the Start/Stop button for 3
seconds or press the
Power
button on the
remote control again.
NOTE
•
If turning off the standby power supply, the
Robot Cleaner will be disconnected from the
SmartThinQ application.
•
If 10 minutes elapse in the following situations,
the Robot Cleaner automatically turns off the
standby power supply.
− When the Robot Cleaner is unable to come
out of a complicated space such as the space
below the dining table while cleaning.
− When the wheels of the Robot Cleaner spin
with no traction or the Robot Cleaner is
caught on an obstacle and unable to come
out.
− When the Robot Cleaner is standing by in a
place other than the Home Station.