Operating
28
Oper
ating
3
Radio Operations
Be sure that FM antenna is connected. (Refer to
page 18)
Listening to the radio
1. Press
FUNCTION
until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold
TUNING-/+
on the remote
control or
Y/U
on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
Press
TUNING-/+
on the remote control or
Y/U
on the unit repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing
VOL +/-
on the remote
control repeatedly.
Improving poor FM reception
Press
T
on the unit or
d
/
M
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press
FUNCTION
until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+
on the remote control or
Y/U
on the unit.
3. Press
TUNER MEMORY
on the remote control.
A preset number will blink in the display
window.
4. Press
PRESET.FOLDER
W
/
S
on the remote
control to select the preset number you want.
5. Press
TUNER MEMORY
on the remote control.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER
W
/
S
or
0
to
9
numerical
buttons on the remote control.
Deleting all the saved stations
1. Press and hold
TUNER MEMORY
on the remote
control for two seconds.
“ERASE ALL?” will flash up on the unit display.
2. Press
TUNER MEMORY
on the remote control
to erase all the saved radio stations.
