69
Others
Others
12
Symptom
Things to check
Overall the unit / Disc / USB (Cont’d)
The disc is not operable.
• Is “DISC” on the front panel lighted? If no, press
[DISC]
on the remote
control.
• Is a disc in this unit?
• Depending on the disc, playback speed control is not available.
The disc tray does not open / close.
• When the dubbing list is displayed, the disc tray may not open / close.
• If an unsupported disc is placed in this unit, the disc tray may not open.
In this case, press the power button on the unit for 8 seconds or longer
to turn off the unit, then press
[
OPEN/CLOSE]
button. If this does not
solve the problem, try step 2 in “
Ƈ
Trouble checkup” on page 68.
The setting screen / sub menu are not
displayed or items are not selectable.
• When the operation is not available, the item may not be displayed or
selectable.
• Does your TV’s external source input corresponds to the unit’s output?
This unit does not operate properly.
• If the unit is under condensation conditions, let the unit sit (powered on)
for at least 2 hours.
The display panel shows an abnormal
indication.
• Try step 2 in “
Ƈ
Trouble checkup” on page 68.
The USB device is not operable.
The USB device is not readable.
• Is the USB device compatible with this unit?
• Is the USB cable connected securely?
• If connecting a USB device during recording / playback / dubbing, it may
not be recognised.
While a USB device is connected, this
unit becomes inoperable.
• It is caused by the USB device which has a problem during playback /
slide show or while dubbing the contents to the HDD.
In this case, disconnect the USB cable, then reconnect it.
Viewing a programme / switching channels
TV programme is not displayed.
• Are the connections, the antenna
ʊ
this unit
ʊ
TV, made correctly?
• Are the cables / cords connected to the correct terminals (including input /
output)?
• Are the cables / cords connected securely?
• When connecting this unit and TV with an HDMI cable, be sure that the
resolution in “Settings” > “HDMI” > “HDMI Video Resolution” is set to the
correct resolution which the TV supports.
If you are not sure, press and hold
[
]
for 5 seconds or longer. This
configures the resolution to “Auto” and the selected channel should be
displayed.
• When “HDMI Video Resolution” is set to “Auto” or “1080p24”, the video out
jack (yellow) may not output a signal.
In this case, disconnect the HDMI cable or set the current resolution to
another.
• Does your TV’s external source input corresponds to the unit’s output?
TV’s image quality became low after
connecting this unit.
• Do you use a DTV signal splitter? If so, a TV signal booster (commercially
available) may improve. If a signal booster is not effective, contact the
retailer you purchased the unit from.
• When this is not in use, place it in standby mode (turn off the unit, not
unplug the AC power code).
• Avoid arranging the RF cable, HDMI cable and LAN cable, etc. close
together.
• Try “Auto Tuning” in “DTV Menu” > “Installation”.
Unable to switch channels.
• During a dual recording, other than the recording channels cannot be
viewed.
• During playback, this unit is unable to switch channels.
Subtitles are not displayed while
viewing a DTV programme.
• Be sure “Subtitle” in the sub menu is not set to “Off”.
-
The sub menu can be called up by pressing
[SUB MENU]
while viewing
a DTV programme.
-
There are cases in which a subtitle language appears available while
the subtitle information is not actually broadcasted.
“Programme Guide” is not displayed.
• “Programme Guide” is not available until this unit receive the EPG data
after tuning is completed.
A different programme is recorded
from the timer programming set from
“Programme Guide”.
• There are cases in which a broadcast station airs a different programme
from the scheduled programme. This causes an inconsistency between
the actual air and the information in the programme guide.
Continued on next page
EAB31̲30AD.indb 69
2012/08/28 10:13:25
Содержание BR625T
Страница 88: ......
