43
Video Input
Screen size adjust
The size of the screen can be reset to the value
the user desires.
1.Press MENU button on the remote control to
display the on screen menu.
Press ▲▼ to select the screen. Then press ►
or press OK.
2.Press ▲▼ to select the desired item, and then
press OK.
Normal
This function will make the width-height proportion of
the projected image consistent with the input signals.
16:9
This item provides images with a width-height ratio of
16:9.
√Note:
● If no signal is detected, the items of the custom
can not be selected, the related dialog box
disappears.
● The horizontal/vertical proportion and the
horizontal/vertical position should be adjusted
according to the input signal.
● 16:9 doesn't work when 720p or 1080i is
select in Component or HDMI input.
● Custom sub-menus are disabled when Pixel Clock
higher than 140MHz.
Screen menu
Screen icon
Custom
This item can help users manually adjust the
proportion and position of the screen.
Adjustable range depends on the input signal
formats. Some have a limitation to adjust.
When this item is selected, press ►. The
indication of self-definition will appear on the
screen. You can press ▲▼ to select the items to
be adjusted.
Scale H/V
: To adjust the horizontal/vertical
proportion of the screen.
H&V
: When this item is enabled, the width-
height proportion will be locked. The vertical
proportion is displayed in gray, meaning
“disabled”. You can adjust the horizontal
proportion, and then modify the proportion of
the screen on the basis of the width-height
proportion.If you reset the H&V settings, then
H&V data will be initialized.
Position H/V
: To adjust the horizontal/vertical
position of the screen.
Apply to all inputs
: Use this item to save
input adjusted proportion.When you press
Select at this item, a dialog box will pop up for
confirmation. To save the proportion, press
Select at Yes. If you select self-definition, the
system will use the saved proportion.
Reset
: This item allows you to re-set the
adjusted values.In the initial state, press Select,
and a dialog box will pop up for confirmation. To
re-set the parameters, press Select at Yes.
Remote control
Arrow buttons
RATIO buttons