22
Installation
Lens installation
Follow the instructions below to install the lens upon replacing or using the provided lens. For the
specification of projector lens, contact your dealer.
Removing the lens
Installing the lens
1 Shift the lens to the center with the lens shift
function.
2 Turn off the projector, and unplug the AC power
cord.
3 Press and hold the lens release button on the
top counterclockwise until the lens cannot be
rotated. Draw it out slowly from the projector.
1 Remove the lens decorator.
2 Align the red point on the lens with that on the
projector to install the lens.
3 Rotate the lens clockwise slowly until it
clicks.Make sure that the lens is the projector.
Caution
Do not drop the lens when handling.
Caution
While installing the lens, do not hold the
release button.
Lens release button
Red point
Notes on lens installation
● Do not touch or remove any part except lens and its relative part. This may cause a malfunction,
electric shock, fire or other hazards.
● Make sure the mode of the lens is compatible with your projector before installing or replacing the lens.
● For information about the lens and its installation, contact the local dealer.