LG AS-W1863 Series Скачать руководство пользователя страница 6

Страница: 6 / 81

- 6 -

LGE Internal Use Only

Safety Precautions

For installation, always con-
tact the dealer or an
Authorized Service Center.

• There is risk of fire, electric shock,

explosion, or injury.

Do not install the product on a
defective installation stand.

• It may cause injury, accident, or

damage to the
product.

Be sure the installation area
does not deteriorate with age.

• If the base collapses, the air condi-

tioner could fall with it, causing
property damage, product failure,
and personal injury.

Do not let the air conditioner
run for a long time when the
humidity is very high and a
door or a window is left open.

• Moisture may condense and wet or

damage furnishings.

Always install a dedicated
circuit and breaker.

• Improper wiring or installation may

cause fire or electric shock

Use the correctly rated break-
er or fuse.

• There is risk of fire or electric

shock.

■

Operation

Do not turn the air-conditioner
ON or OFF by plugging or
unplugging the power plug.

• There is risk of fire or electric

shock.

Use a dedicated outlet for this
appliance.

• There is risk of fire or electric

shock.

Grasp the plug to remove the
cord from the outlet. Do not
touch it with wet hands.

• There is risk of fire or electric

shock.

Содержание AS-W1863 Series


















































































Результаты поиска

Содержание AS-W1863 Series

Отзывы:

Похожие инструкции для AS-W1863 Series

Бренды по названию

Популярные бренды

LG AS-W1863 Series, Руководство по обслуживанию

Результаты поиска

Содержание AS-W1863 Series

Отзывы:

Похожие инструкции для AS-W1863 Series

Бренды по названию

Популярные бренды