Operating
35
Oper
ating
4
Radio Operations
Be sure that FM antenna is connected. (Refer to the
page 19.)
Listening to FM radio
1. Press
RADIO
on the remote control or turn
INPUT SELECTION
on the unit until FM appears
on the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold
TUNING -/+
for about 2 seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit tunes
in a station.
Manual tuning :
Press
TUNING -/+
on the remote control
repeatedly.
3. Adjust the volume by pressing
VOL+/-
on the
remote control or turn
MASTER VOLUME
on the
unit.
Improving poor FM reception
Press
MONO/STEREO
on the remote control. This
will change the tuner from stereo to mono and
usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Tune in to a radio station.
2. Press
ENTER/SET
. A preset number will blink in
the display window.
3. Press
PRESET//-
to select the preset
number you want.
4. Press
ENTER/SET
. The station is stored.
5. Repeat steps 1 to 4 to store the other stations.
6. To listen to a preset station, press
PRESET/
/-
or 0 to 9 numerical buttons.
Deleting all the saved stations
1. Press and hold
DELETE
for two seconds.
“ERASE ALL?” will flash up on the unit display.
2. Press
ENTER
to erase all the saved radio stations.
LHR846-FE.DVNMLLK_ENG.indd 35
2017-04-06 �� 2:04:02
