Wall Mounted _
12
Indoor Units
LCS
(Light Commercial System) Indoor unit
10. Installation
10.1 Selection of the best location
•
There should not be any heat source or
steam near the unit.
• There should not be any obstacles to prevent air cir-
culation.
• A place where air circulation in the room will be
good.
• A place where drainage can be easily obtained.
• A place where noise prevention is taken into consid-
eration.
• Do not install the unit near the door way.
• Ensure the spaces indicated by arrows from the wall,
ceiling, fence, or other obstacles.
The mounting wall should be strong and solid enough to
protect it from vibration.
1.Mount the installation plate on the wall with
four Type "A" screws.
(If mounting the unit on the concrete wall, consider using
anchor bolts.)
• Always mount the Installation plate horizontally by
aligning the marking-off line by means of thread and a
level.
Front
Right
Rear right
Rear left
Down right
Left
More than 200mm
More than
100mm
More than 2300mm
More than
100mm
S5 chassis
Installation Plate
Chassis
Hook
Type “A”
