PRODUCT INTRODUCTION
ENGLISH
11
Wireless remote controller
Heat Pump
Handling the remote control
- Aim at the signal receptor on the floor standing type air
conditioner when operating.
- Block a strong light over the signal receptor with a curtain
or etc. so as to prevent the abnormal operation. (ex: elec-
tronic quick start, ELBA, inverter type fluorescent lamp)
- Be sure that there are no obstructions between the re-
mote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to
direct sunlight, or next to a heating unit, or other heat
source.
1
5
2
6
9
10
12
4
3
8
11
7
No.
Control
panel
Description
1
r
Remote controller operation lamp
2
|
Power ON/OFF button : Operation will
start when this button is pressed, and
stop when the button is pressed again.
3
4
FAN SPD
Indoor fan speed button : To select the
desired fan speed.
4
Temperature setting button
5
A
Cooling button
6
B
Heating button
7
D
Dehumidification button : Can effectively
remove humidity when at the time of
rainy season or high humidity.
8
C
Auto Operation button : Auto heating and
cooling Operation is conducted in accor-
dance with setting Temperature.
9
Fan mode button
10
Power cooling and heating mode button :
Powerful cooling and heating are
performed
11
ON/OFF timer setting button : Set the
time of starting or stopping
12
Timer cancel button
