12
ENGLISH
PRODUCT INTRODUCTION
Cooling only
Handling the remote control
- Aim at the signal receptor on the floor standing type air
conditioner when operating.
- Block a strong light over the signal receptor with a cur-
tain or etc. so as to prevent the abnormal operation. (ex:
electronic quick start, ELBA, inverter type fluorescent
lamp)
- Be sure that there are no obstructions between the re-
mote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to
direct sunlight, or next to a heating unit, or other heat
source.
1
5
2
8
9
11
4
3
7
10
6
No.
Control
panel
Description
1
Remote control operation lamp
2
|
Power ON/OFF button : Operation will
start when this button is pressed, and
stop when the button is pressed again.
3
Indoor fan speed button : To select the
desired fan speed.
4
Temperature setting button
5
A
Cooling button
6
D
Dehumidification button : Can effectively
remove humidity when at the time of
rainy season or high humidity.
7
C
Auto operation button : In operation this
function, air conditioner control the setting
temperature by comparing room tempera-
ture and hot or cool level customer set
8
Fan mode button
9
Power cooling mode button : Powerful
cooling is performed
10
ON/OFF timer setting button : Set the
time of starting or stopping
11
Timer cancel button
