LG ADR-620 Скачать руководство пользователя страница 16

Страница: 16 / 28

PLAYBACK BASICS

- 16 -

1. Connect the Power cord and power-up

the unit by pressing the Main

POWER

Switch

until it latches.

2. Press the

OPEN/CLOSE

button to open

the disc tray.

3. Load a disc in the tray with the

printed(label) side facing up.

4. Gently push the front of the tray or press

OPEN/CLOSE

button.

If the disc is standard CD or a finalized CD-
RW disc, TOC will flash while the unit reads
the disc’s Table of Contents Information .
Once that data is read, the

Information

Display

will show the total number of tracks

and the total time of all tracks on the disc.
The

CD Indicator

will also light to indicate

that a standard CD is in use.

When an unfinalized CD-R or CD-RW disc
is placed in the

Record Deck

, the letters

OPC will flash once the Table of Contents
has been read. This indicates that the unit is
optimizing its circuit for maximum
compatibility with the specific recordable
disc in use . The number and total running
time of any tracks that have already been
recorded will appear in the

Information

Display

, and the appropriate indicator will

light to tell you if a CD-R or CD-RW disc is
in use.

If a computer data disc is placed in the
machine, a DATA DISC message will
appear to alert you to the error.
Data discs will not play and may not be
recorded or dubbed in the unit.

1. Turn on the Power.
2. Insert a disc.
3. To start the playback, press the PLAY[ ]

button on the front panel for the
appropriate deck or press the CDP or
CDR button on the remote for the desired
deck and then press the PLAY[ ] button
on the remote.

The

Information Display

will show the

track number being played and running time
of the track. As each new track begins to
play, the track time will reset to 00:00 and
begin to count up for the new track.

NOTE

: Remember that unfinalized CD-R or

CD-RW discs will only play in the

Record

Deck

. If you attempt to play an unfinalized

disc in the

Play Deck

, a DISC ERROR

message will appear to remind you to play
the disc in the other deck.

To go directly to a specific track on a
disc

Enter the track number using the

Numeric

Keys.

Note that when selecting a two digit track
number, the second digit must be entered
within two seconds after the first Numeric
Key is pressed.

To play all of the tracks on a disc in
random order

Press the

CDP

CDR

button for the

desired deck, and then press the

RANDOM

button.
The unit will briefly examine all of the tracks
on the disc and

RANDOM Indicator

will

illuminate. Each track will be played in a
random order until all tracks on the disc
have been played. Note that there will be
brief pause in between each track as the
unit searches for the next track to play.

To momentarily stop the disc at any time

Press the

PAUSE

[ ] button.

Press either the

PLAY

[ ] button or the

PAUSE

[ ] button to resume playback at

the point where the disc was paused.

To stop playback at any time

Press the STOP[ ] button for the deck in
use.
When there is only one disc in the unit, it will
automatically stop when all tracks on a disc
have played through.

When there is a disc in each deck, the
player will respond in one of two ways,
depending on which way the dual-play
setting is activated. In normal operation,
when the disc in one drawer finishes, the
disc in the other drawer will begin to play.
When the

DUAL

button is pressed so that

the

DUAL-Play Indicator

is lit, each deck

will operate as a separate, single-play CD
unit without regard to the status of the other
deck.