- 30 -
Copyright ©2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4.1 E.S.P. (External Static Pressure) Setting
4. Installation Functions
Function Code
Pressure
Press button for 4 seconds to enter the installer
setting mode until timer segment displays “01:01”.
1
Select static pressure by pressing button.
(01:V-H, 02:F-H, 03:V-L, 04:F-L)
3
Press button to save.
4
5
Pressing button will exit settings mode.
❈
After setup, it automatically gets out of setup mode if there is no button
input for 25 seconds.
❈
When exiting without pressing set button, the manipulated value is not
reflected.
If pressing button repeatedly, it moves to static pressure
selection menu as picture below.
2
This function is applied to only duct type. Setting this in other cases will cause malfunction.
<Static Pressure Setting Table>
Part 2 Functions & Controls
Pressure selection
Function
Zone state
ESP standard value
01
V-H
Variable
High
02
F-H
Fixed
High
03
V-L
Variable
Low
04
F-L
Fixed
Low
Содержание ABNH09GL1A2
Страница 146: ...P NO MFL67478301 December 2013 ...