3. TECHNICAL BRIEF
- 48 -
Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
ʹΠΡΪΣΚΘΙΥ͑ι ͣͨ͑͡͡ͽ͑ͶΝΖΔΥΣΠΟΚΔΤ͑͟ͺΟΔ͑͑͟ͲΝΝ͑ΣΚΘΙΥ͑ΣΖΤΖΣΧΖΕ͑͟
ΟΝΪ͑ΗΠΣ͑ΥΣΒΚΟΚΟΘ͑ΒΟΕ͑ΤΖΣΧΚΔΖ͑ΡΦΣΡΠΤΖΤ
ͽͶ͑ͺΟΥΖΣΟΒΝ͑ΆΤΖ͑ΟΝΪ
49/110
Figure 3.11.4 Different Application Scenarios
3. TECHNICAL BRIEF
In order to achieve the single-speaker concept by parallel connection of Earpiece and Headset amplifier
the Earpiece amplifier have to sustain the up to 5 V voltage of the class-D amplifier.
̲
Audio-in Path
The audio-in path of X-GOLD™110 provides two differential microphone input sources, MIC1and MIC2.
• The inputs for microphone MIC1 are MICP1 and MICN1.
• The inputs for microphone MIC2 are MICP2 and MICN2.
The audio-in path consists of an input selector, a low noise amplifier and following pre-filter with gain
control, a second order
ȭȟ
-converter and a digital decimation filter. It supports both standard GSM
(bandwidth 3.5 kHz) and wideband (bandwidth 7 kHz) speech bands.
The differential input signal from the microphone first passes a low noise amplifier and following pre-
filter and an anti-aliasing pre-filtering stage achieving and overall variable gain ranging from 0 dB to +39
dB . The signal is then modulated by a second order
ȭȟ
-converter which is clocked with the same clock
rate as the digital to analog converters. The
ȭȟ
-converter delivers a 1-bit pulse density modulated data
stream at a rate of 2 MHz to the digital decimation filter which reduces the rate to 8 kHz or 16 kHz,
depending on the current mode.
To improve SNR the sample frequency can be doubled in dedicated modes and the modulated data
stream is 4MHz instead of 2 MHz.