ENGLISH
37
MAGIC REMOTE CONTROL FUNCTIONS
MAGIC REMOTE CONTROL FUNCTIONS
When the message “Magic remote control battery is low. Change
the battery.” is displayed, replace the battery. To install batteries,
open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities of the battery
may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure
to point the remote control at the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.
y
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
CH
VOL
/Q.MENU
BACK
SMART
(POWER)
Turns the TV on or off.
SMART
Accesses the Smart Home menu.
Pointer (RF transmitter)
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
BACK
Returns to the previous screen.
Wheel (OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
channels.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears,
and the Magic remote control
works as a regular remote control.
To display the pointer again, shake
the Magic remote control from
side to side.
Used for viewing 3D video.
/
Q.MENU
Accesses the Universal Control.
(Depending on country)
Accesses the quick menu.
VOL
Adjusts the volume level.
CH
Scrolls through the saved channels.
(MUTE)
Mutes all sounds.
Voice recognition
-This is a beta version and only
available in selected functions for
supported models.
-Network connection is required to
use the voice recognition function.
1. Press the Voice recognition
button.
2. Speak slowly and precisely.
When a voice is recognized, the
processing message appears on
the screen.
• Use the magic remote control
no further than 10 cm from your
face.
(For 55/65LA9700, 55/65LA9650)
or
