35
ENG
ENGLISH
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Con-
trol
It is necessary to ‘pair’ (register) the magic remote con-
trol to your TV before it will work.
How to register the Magic Remote Control
BACK
HOME
P
MY APPS
1 To register automatically, turn the
TV on and press the
Wheel(OK)
button. When registration is
completed, the completion
message appears on the screen.
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK)
button to complete
registration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the
BACK
and
SMART
buttons together for 5
seconds to reset, then register it
by following “How to register the
Magic Remote Control” above.
2 To re-register the Magic Remote
Control, press and hold the
BACK
button for 5 seconds
toward the TV. When registration
is completed, the completion
message appears on the screen.
How to use Magic Remote Con-
trol
1 If the pointer disappears, move
the remote control slightly to left
or right. Then, it will automatically
appear on the screen.
»
If the pointer has not been
used for a certain period of time, it
will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of the
remote control at your TV then
move it left, right, up or down.
»
If the pointer does not work
properly, leave the remote control
for 10 seconds then use it again.
Precautions to Take when Using
the Magic Remote Control
y
Use the Magic Remote Control within the maxi-
mum communication distance (10 m). Using the
Magic Remote Control beyond this distance, or
with an object obstructing it, may cause a com-
munication failure.
y
A communication failure may occur due to nearby
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause interfer-
ence, as these use the same bandwidth (2.4 GHz)
as the Magic Remote Control.
y
The Magic Remote Control may be damaged
or may malfunction if it is dropped or receives a
heavy impact.
y
Take care not to bump into nearby furniture or oth-
er people when using the Magic Remote Control.
y
Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
y
It is recommended that an Access Point (AP) be
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic Remote
Control may not perform as expected due to fre-
quency interference.
1
If you press
Wheel(OK)
on the Magic Remote
Control, the following screen appears.
Shows information about the current programme
and screen.
2
You can select More Menu.
More
