24
ENG
ENGLISH
ASSEMBLING AND PREPARING / VIDEO CALL CAMERA
VIDEO CALL CAMERA
Product Handling
y
Do not let the camera get wet. Liquid getting into the
camera could cause a short circuit.
y
Wipe the camera gently with a dry cloth to remove any
dust or dirt. If the product is very dirty, spray a mild
detergent on the cloth first.
y
Do not clean with thinner, alcohol, benzene or any
other volatile agent.
These may damage the product’s surface or affect its
operation.
y
Do not disassemble, repair or alter the product.
Incorrect disassembly may cause a fire, electric shock,
or injury.
y
Do not shake the camera.
y
Do not pull on the cable.
Installation Instructions
y
Make sure you have enough space for connections
when installing the product.
y
Do not install in a dusty, dirty or moist area.
y
Do not install in direct sunlight or near a heat source.
y
Magnetic objects, such as speakers, may interfere with
the camera’s operation.
y
Install the product in a place with moderate
temperature and humidity. The recommended
temperature range is 0 °C (32 °F) to 40 °C (104 °F).
y
Strong electromagnetic waves from other devices
could interfere with the camera’s operation.
y
Remove all the protective plastic bags (Vinyl) before
use.
The product and company names contained in this
manual may or may not be registered trademarks
or copyrights, and are only used for identification or
explanatory purposes. All trademarks reserved.
1 Use Cable Holder to neatly secure and position
cables together.
(Only EA88**-TA)
7
CAUTION
y
Do not move the TV by holding the Cable Holder
and Power Cable Holder, as the Cable Holder and
Power Cable Holder may break, and injuries and
damage to the TV may occur.
** Stand Type **
** Wall Mount Type **
Cable Holder
Power Cable Holder
