LG 42LY960H.ATRZ, Инструкция по эксплуатации

Страница: 17 / 40

ENG
ENGLISH
17
INSTALLATION MENU
- When 'Program Change’ is set to Yes(Change Possible), ‘Program Key’, ‘Numeric Key’, ‘List
Key’, ‘Q.View’ Key does work and entering ‘Channel Menu' in the Main Menu OSD is possible.
Menu display
y
Function to decide whether work with menu (including relevant menus too) of control key (Yes – Enter
possible) or not (No – Enter Impossible).
- Although select No(Enter impossible), the action that press a Menu button for 5 seconds to enter
‘Installation Menu’ is available.
- When select Yes(Enter possible), Menu works.
OSd display
y
Decide to display OSD or not by setting ‘OSD Display’ as Yes(Display) or No(Do not Display).
- When ‘OSD Display’ is set to ‘No’(Do not Display), all OSD is not displayed except some
exception.
- Although select ‘No’ (Do not Display), the action that press a Menu button for 5 seconds to
enter ‘Installation Menu’ and entering service menu are available. (In-Start, Power-Only, Adjust,
Installation Menu…)
System Provider Mode
y
‘System Provider Mode’ allows access to the menu system from the front panel or remote control but
access is controlled as follows:
- When value is ‘Yes’, Accessible Items on the menu system, others are not permissible.
» Input select screens
»
Sleep timer
» Aspect Ratio
»
Closed Caption
» ‘Lock’ / ‘My Media’ / ‘Network’ / ‘Support’ / ‘Bluetooth’ Menu
- ‘Q.menu’, which is related to ‘Setup’ Menu, is not accessible.
- If the channel map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’, ‘Fav’,
‘CH+’, ‘CH-’ keys.
dTV Programme update
- It is a mode to set whether to update dtv Programme automatically or not.
- When DTV Programme Update is set to ‘Auto’, the function to update TV’s programme map
according to dtv programme’s stream information.
- DTV Programme Update is set to ‘Manual’, the function to keep TV’s programme map even
though dtv programme’s information is changed.
Power On default
- Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Stand-
by status.
- Set to Yes(Work) or No(Do Not Work).
- When ‘Power On Default’ is set to No, it is not applied to the subordinate Programme, Volume,
A/V Setting menu.
- When Power On Default is set to Yes, it can set by entering the subordinate menu.
Power Management
- If there is no input the amount of time that is set via the remote control or local key after the TV is
turned on, TV is turned off automatically.
- The default setting is “Off”.