LG 42LY960H.ATRZ, Инструкция по эксплуатации

Страница: 27 / 40

ENG
ENGLISH
27
INSTALLATION MENU
StandBy
- Set the sending and receiving scenario of OpStandBy(0x0c) command.
- Ths detailed scenario is described on the table below.
Send Receive
Send Only O X
Receive Only X O
All O O
Off X X
Forced initialize
- This setting will be enabled When CEC mode is set as ‘TVLink-CEC’
- If ‘Enable” is selected, TV will change its input source to HDMI1 by any HDMI-CEC simulation
from a device.
HTNg Hotel Mode
- If you use following functions via TVLink-HCEC, HTNG Hotel mode will be set as “Yes”
automatically. (*Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start
Volume)
- Even if ‘Hotel Mode Operation’ is set as No, above settings are still effective.
Clock Setup
Clock display
- You can select ‘YES’ or ‘NO’ by pressing button.
- After selecting ‘YES’, you can see the LED Clock TV.
dimming Standby
- Standby Dimming value Range : 0~15
dimming PowerOn
- PowerOn Dimming value Range: 0~99
Clock Source
- You can select ‘Off’, ‘Pro:Centric’, ‘TV’ by pressing button.
Forced initialize
- If ‘No’ is selected, a command should be sent and received between the TV and a -device for
proper initialization.
- If Yes is selected, initialization is implemented when a device receives a command. If initialization
is not implemented, the TV remote control and local key will work.