18
instaLLation Menu
- It is a mode to select 'On Timer Operation' working one time or repeatedly .
'
one
' : 'On Time' in the user menu operates only one time when the 'On Time' menu is set to 'ON' .
'
repeat
' : 'On Time' operates repeatedly when the 'On Time' menu is set to 'ON' .
(5) on timer operation
- It is a mode to set whether to use Select RCU or not . When ‘Select RCU’ is set to ‘Enable’, You can
adjust ‘Number of RCU’ menu .
(6) select rcu
- It is a mode to set Number of RCU .
Number of RCU value range 1~9 (When ‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0 (When ‘Select RCU’ is set to ‘Disable’)
It is a mode to set whether to update DTV channel automatically or not .
When DTV Channel Update is set to ‘Auto’, the function to update TV’s programme map according to
DTV programme’s stream information .
DTV Channel Update is set to ‘Manual’, the function to keep TV’s programme map even though DTV
programme’s information is changed .
(7) number of rcu
(8) dtV channel update
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV .
- Sets whether to use an external RS-232 port or MPI pin in the MPI card for communication between
the TV and RS-232 . You can set to
rs-232
or
Mpi
using the
button .
(3) communication
(Only 32/37/42LD6***)
- It is a mode to select whether to display RGB Data together on RF image or not . When ‘RGB
Overlay In RF’ is set to ‘Yes’, Overlay Mode get to ‘Enable’ and you can see RGB Data signal as
well as general RF Image .
- This is mainly used to provide information to the hotel guest .
- Sets the MPI power supply . You can set to
Yes
,
no
or
auto
using the
button .
- When it is set to
Yes
, MPI power is supplied when the power is on and in standby mode .
- When it is set to
auto
, MPI power is supplied only when the power is on; it is not supplied when the
power is in standby mode .
(2) Mpi power outlet
(Only 32/37/42LD6***)
(4) rgB overlay in rf
note
► If you connect IB Box to the TV and want to use the channel add, delete, etc . which is one
of the Interactive protocols, first of all, Select DTV Channel Update ‘Manual’ .
► Before beginning to use channel add, delete, etc protocol, delete TV`s channel map using
‘Delete All Programs’ protocol .
► Do not use Auto Tuning, Manual Tuning function .
Содержание 32LV375H-ZA
Страница 2: ......
