LG 32LV375H-ZA, Руководство по установке

Страница: 14 / 32

12
instaLLation Menu
Installation Menu (V2 .21)
LG Hotel Mode Setup
TV Link-Loader
Password Change
Set ID Setup
Clock Setup
Configuration Setup
Power Saving
CEC Setup
External Speaker
Network Setup
Pro:Centric
OK
TV Link-Loader
You can adjust tVLink-Loader menu by only tVLink Loader which is to be
purchased additionally .
- TV sets for each single hotel rooms, providing ‘TVLink-Loader’ does maximise installers convenience .
By copying all programme settings, picture setting, sound setting, option setting and installation menu
setting . from a set as default and conveying into additional sets, which ensures uniformity between
sets and significantly reduces unnecessary installation time via RS232 .
In addition to this, TVLink-Loader enables to load programme for menu installation with wireless basis .
Press the Mode button until the display of TVLink Loader screen changes from “Ready” to “Mode in”.
• Be careful TVLink Loader doesn’t move and point the TVLink Loader towards the below center
on the set during this time .
Use the up/ down button to select the TVLink Loader .
Press the Mode button in order to change from key to key and then press the UP button .
Press the send or receiVe button .
• receiVe : RS232 is the main connection for receiving data .
• send : For transmitting reserved data can be done by wireless IR Signal or RS232 .
1 . Press SEND button to select "IR Send"(to send data through IR)or "RS Send"(to send data
through RS232)for the download mode .
2 . Press ENTER button to start transmitting .
The procedure of Loading will be projected on OSD .
Disappearing OSD implies Completion of data receiving or TV turns off automatically after completion
of data sending .
tVLinK-Loader
TV Link-Loader
Downloading . . .
43%
OK
TVLink-Loader
Receive from USB
OK
Send to USB
TVLink-Loader
(Refer to in p .12)
(Refer to in p .12)
1
* Copy Data item : Programme Data, Installation Menu(excluding the Set ID), Picture, Sound,
Option(Special)
- The other data can be different depending on the chassis .
- Because the Picture Mode: Expert (ISF) Data of the Picture item is charged or the image
quality calibration function by set, it should not be copied .
1
2
3
4
5
6
2
2 1