LG 32LP1R Series, Руководство пользователя

Страница: 12 / 64

12
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the
screen may remain visible on the screen.
VCR Setup
When connecting with an antenna cable
1
2
3
S-VIDEO
OUT
IN
(R) AUD
ANT OUT
ANT IN
VIDEO
AUDIO
AV1 AV2
AV3
L
R
Antenna
(MONO)
Connect the ANT OUT socket of the VCR to the
Antenna socket on the set.
Connect the antenna cable to the ANT IN socket
of the VCR.
Press the PLAY button on the VCR and match the
appropriate programme between the TV and VCR
for viewing.
When connecting with a Scart cable
• If your VCR outputs an AV switching signal via the AV1 or AV2 scart sockets, the set will switch to AV1 input source automati-
cally. But if you want to keep on watching TV mode, press the PR
D D
/
E E
or number buttons.
• You can also record programmes received by the TV on video tape.
• The signal type RGB (the signals red, green and blue) can only be selected for the
AV1 scart socket and the AV1 input source
can be received. These signals are transmitted, for example, by a pay TV decoder, game machine or photo CD unit, etc and that
digital signal can be recorded via
AV1 scart socket.
• If the AV1 , AV2 scart sockets have been connected to the VCRs simultaneously, only the AV2 input source can be received.
• In AV2 scart socket, the video output is not available.
(R) AUDIO (L) AUDIO/
VIDEO
AV1
AV2
Antenna
1
2
3
Connect the scart socket of the VCR to the AV1 scart
socket on the set. Please use shielded scart cable.
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
Select AV1 input source with using the INPUT button
on the remote control.
- If connected to
AV2 scart socket, select AV2 input
source.
1
2
TV Back panel
VCR
VCR
TV Back panel
1
External Equipment Connections
External Equipment Connections
Installation Instruction
Installation Instruction