LG 3 2SM5E Скачать руководство пользователя страница 86

Страница: 86 / 123

ENGLISH

•

If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four

partitions or USB memory devices.

•

If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected.

•

If the USB storage device does not work properly, remove it and connect it again.

•

The speed at which a USB storage device is detected differs from device to device.

•

If the USB storage device is connected in Standby Mode, a specific hard disk will automatically be loaded when the

display is turned on.

•

The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.

•

Any device with more than the recommended capacity may not work properly.

•

If a USB external hard disk with an energy saving feature does not work, turn the hard disk off and on again to make

it work properly.

•

USB storage devices (USB 2.0 or below) are also supported. However, they may not work properly in the videos list.

•

A maximum of 999 folders or files can be recognized under one folder.

Содержание 3 2SM5E




























































































































Результаты поиска

Содержание 3 2SM5E

Отзывы:

Похожие инструкции для 3 2SM5E

Бренды по названию

Популярные бренды

LG 3 2SM5E, Руководство пользователя

Результаты поиска

Содержание 3 2SM5E

Отзывы:

Похожие инструкции для 3 2SM5E

Бренды по названию

Популярные бренды