LG 29FA5 series, Руководство пользователя

Страница: 14 / 20

X-WAVE (Wireless Sound) (option)
You can also listen to the sound through the FM
receiver.
1. Press the MENU button and then
D D
/
E E
but-
ton to select the Audio menu.
2. Press the G G button and then
D D / E E
button to
select X-WAVE .
3. Press the
G G
button and then D D
/
E E button to
select Set Frequency .
4. Press the G G button to tune in a frequency on the
X-wave menu.
5. Use the number 0 to 9 or press the
F F
/
G G
button to match the TV’s frequency and the
FM receiver’s.
Note:
a. If the reception is poor or weak, select a dif-
ferent frequency.
b. For best results, there should be no more
than 5m (16.4ft) between the TV and FM
Receiver.
c. In certain areas, the FM transmitter ability
may be weak, such as near a broadcast
tower.
d. The reception sensitivity may depend on the
kinds of receiver (FM radio).
Turbo sound selection (option)
When this function is on, the sound will be more
emphasized and amplified than normal sound.
Repeatedly press the TURBO SOUND button to
switch on or off.
Sound output selection
In AV mode, you can select output sound for the
left and right loudspeakers.
Repeatedly press the I/II button to select the
sound output.
L+R : Audio signal from audio L input is sent to
left loud-speaker and audio signal from
audio R input is sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left
and right loud-speakers.
R+R : Audio signal from audio R input is sent to left
and right loud-speakers
Stereo/Dual reception
When a programme is selected, the sound infor-
mation for the station appears after the pro-
gramme number and station name disappear.
Mono sound selection
In stereo reception if the stereo signal is weak,you
can switch to mono by pressing the
I/II button
twice. In mono reception the depth of sound is
improved. To switch back to stereo, press the
I/II
button twice again.
Language selection for dual language broad-
cast
If a programme is received in two languages (dual
language), you can switch to
DUAL I , DUAL II or
DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to
the loudspeakers.
DUAL II sends the secondary broadcast lan-
guage to the loudspeakers.
DUAL I+II sends a separate language to each
loudspeaker.
NICAM reception (option)
If your set is equipped with the receiver for NICAM
reception, the high quality NICAM (Near
Instantaneous Companding Audio Multiplex) digi-
tal sound can be received.
Sound output can be selected according to the
type of received broadcast by pressing the
I/II but-
ton repeatedly.
1. When NICAM mono is received, you can
select NICAM MONO or FM MONO.
2. When NICAM stereo is received, you can
select NICAM STEREO or FM MONO. If the
stereo signal is weak, switch to FM mono.
3. When NICAM dual is received, you can select
NICAM DUAL I , NICAM DUAL II or
NICAM DUAL I+II or MONO . When FM
mono is selected the display MONO appears
on the screen.
14
Audio adjustment
Broadcast
Mono
Stereo
Dual
On Screen Display
MONO
STEREO
DUAL I