LG 26LT670H Скачать руководство пользователя страница 30

Страница: 30 / 68

206-4213

USB Cloning Procedures (Cont.)

Teach Master TV Setup to Target TV

1. Turn ON the Target TV.

The next step depends on whether the Automated Installation Routine

Wizard appears on the screen when you turn ON the TV:
• If the wizard is displayed, the TV is already in the required factory

default state. Use the Up/Down arrow keys on the Installer Remote

to select

Exit

from the Welcome screen, and press

to exit the

wizard. Then, go to step 3.

• Otherwise, ensure the Target TV is in Pass-through Mode. Then,

continue with step 2.

2. Use the Installer Remote to access the Target TV Installer Menu (see

“Accessing the Installer Menu” on page 18 for further information). Set

Installer Menu item

117 FACT DEFAULT

001

, and press

. When

the value changes back to 0, press

again to exit the Installer Menu.

Note:

This step restores factory default settings on the TV, which will

in turn re-activate the Automated Installation Routine Wizard. Use the

Up/Down arrow keys on the Installer Remote to select

Exit

from the

Welcome screen. Then, press

to exit the wizard.

3. Plug the USB memory device with the .tlx file into the Target TV USB IN

port.

4. Press

MENU SETTINGS

on the Installer Remote to display the TV

setup menus. Use the arrow navigation keys to select/highlight the

Option

menu icon, and then press the number “

” key a total of seven

times to display the USB Download Menu.

5. Use the Up/Down arrow keys to select

Teach To TV

(TLX)

, and then

press

6. Use the Up/Down arrow keys to select the Master TV Setup you want to

install, and then press

. Note: Filenames identify the TV and the TLX

version (see example at right).

Teaching status will be shown on a progress bar in a new window.

When the Teaching process is complete, the TV will briefly display a

“Teaching Completed” window and then exit the USB Download Menu.

7. Remove the USB memory device from the Target TV, and verify that

the Master TV Setup is now resident on the Target TV.

Note:

After the Teaching process is complete, the TV tunes according to

the setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If

a Start Channel is specified, the TV will tune to that channel; otherwise, the

TV will return to the last channel tuned.

USB Download Menu

Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)

Teach To TV (TLX)

xxLT670H-UA00003.TLX

UPDATING...

Do not unplug!

50%

Teach To TV

Содержание 26LT670H





































































Результаты поиска

Содержание 26LT670H

Отзывы:

Похожие инструкции для 26LT670H

Бренды по названию

Популярные бренды

LG 26LT670H, Руководство по установке

Результаты поиска

Содержание 26LT670H

Отзывы:

Похожие инструкции для 26LT670H

Бренды по названию

Популярные бренды